Ip Default-Gateway - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
ip broadcast-address <bc addr>
bc addr
Example:
ip broadcast-address 192.168.255.255

ip default-gateway

Use the ip default-gateway command to define a default gateway (router).
The no form of this command removes the default gateway.
The syntax for this command for the P332G-ML/P332GT-ML/P333R/P333R-LB is:
[no] ip default-gateway <ip-address>[<cost>][<preference>]
The syntax for this command for the X330WAN is:
[no] ip default-gateway {<ip-address> | <interface-type>
<interface-number>} [<cost>] [<preference>] [permanent]
ip-address
cost
interface-type
interface-number
preference
permanent
Example:
To define the router at address 192.168.37.1 as the default gateway:
Router-N(configure)# ip default-gateway 192.168.37.1
Example:
X330WAN-2DS1-1(super)# ip default-gateway 132.55.4.45 4 high
X330WAN-2DS1-1(super)# ip default-gateway Serial 1:1 permanent
X330WAN-2DS1-1(super)# no ip default-gateway
70
The broadcast IP address
The IP address of the router.
The path cost. The default is 1.
The interface type.
The interface name.
Preference, either High or Low. The default is Low.
The route will not be disabled if the interface is down.
Avaya X330W-2DS1 User's Guide