Ip Bootp-Dhcp Server (Interface Context); Ip Broadcast-Address (Interface Context) - Avaya X330W2-DS1 User Manual

Examples:
To enable relaying of BOOTP and DHCP requests:
X330WAN-2DS1-1(configure)# ip bootp-dhcp relay
To disable relaying of bootp and dhcp requests:
X330WAN-2DS1-1(configure)# no ip bootp-dhcp relay

ip bootp-dhcp server (Interface context)

Use the ip bootp-dhcp server command to add a bootp/dhcp server to
handle bootp/dhcp requests received by this interface. The no form of this
command removes the server. A maximum of two servers can be added to a single
interface. Using the X330WAN, the no form of this command remove a bootp
server.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip bootp-dhcp server <ip-address>
ip-address
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface "marketing":
X330WAN-2DS1-1(configure)# ip bootp-dhcp server 192.168.37.46

ip broadcast-address (Interface Context)

Use the ip broadcast-address command to update the interface broadcast
address. The Broadcast address must be filled in with 0s or 1s, for example,
10.255.255.255 or 10.0.0.0.
Note: This command is executed from the Serial, Fast Ethernet and Fabric Fast
Ethernet interfaces.
Avaya X330W-2DS1 User's Guide
The IP address of the server
Layer 3 CLI Commands
69