(Ip Vrrp) Timer; Network (Router-Ospf Context) - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
[no] ip vrrp <vr-id> priority <pri-value>
vr-id
pri-value
Example:
To set the priority value for virtual router 1 to 10:
X330WAN-2DS1-1(configure)# ip vrrp 1 priority 10

(ip vrrp) timer

Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID. Use the no form of this command to
restore the default value.
The syntax for this command is:
[no] ip vrrp <vr-id> timer <value>
vr-id
value
Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:
X330WAN-2DS1-1(configure)# ip vrrp 3 timer 2

network (Router-OSPF context)

Use the network command to enable OSPF in this network. The no form of this
command disables the OSPF in this network. The default is disabled.
The syntax for this command is:
network <net addr> [<wildcard-mask> [area <area id>]]
net addr
wildcard-mask
area id
86
Virtual Router ID (1-255)
The priority value (1-254)
Virtual Router ID (1-255)
The advertisement transmit time (seconds). The
range is from 1 to 255.
IP address
Wildcard mask address
Area ID. This parameter exists for compatibility with
the P550.
Avaya X330W-2DS1 User's Guide