Important Safety Information; Requirements And Specifications; Technical Specifications - Avaya X330W2-DS1 User Manual

Important Safety Information

You must read the following safety information before carrying out any installation
or removal of components, or any maintenance procedures.
Warning: Warnings contain directions that you must follow for your personal
safety. Follow all instructions carefully.
Caution: The Avaya P330 switches and modules contain components sensitive to
electrostatic discharge. Do not touch the circuit board unless instructed to do so.
Please read the following safety information thoroughly in conjunction with the
safety information supplied with the Switch before installing an X330WAN.
• This unit operates under SELV (Safety Extra Low Voltage) conditions,
according to IEC 950, the conditions of which are maintained only if the
equipment to which it is installed is also operational under SELV.

Requirements and Specifications

This section provides the technical requirements and specifications of the
X330WAN.

Technical Specifications

This section provides the technical specifications for all Avaya X330WAN access
router modules currently available.
The following table shows the X330WAN operating specifications.
Item
Operating Temperature
Operating Humidity
Mechanical Shocks
Avaya X330W-2DS1 User's Guide
Value
-5 to 50° C (23–122°F)
5% to 95% relative humidity, non-condensing
TR-NWT-000063 - Network Equipment Building
System, Generic Equipment Requirements,
chapters:
4.4.1 Shock Criteria
4.4.2 Vibration Criteria
5.4.1 Shock and Vibration Test Methods
Requirements and Specifications
III