Show Ip Access-Lists; Show Ip Access-Lists Details - Avaya X330W2-DS1 User Manual

show ip access-lists

Use the show ip access-lists command to see all the current policy lists.
The syntax for this command is:
show ip access-lists[<policy-list-number>]
policy-list-number
Output Example:
X330WAN-2DS1-1(configure)# show ip access-lists
ip access-list 100 10 deny-and-notify tcp
192.168.55.0
any range
ip access-list 100 30 deny udp
any
any
optional
ip access-list 100 35 deny ip
any
any
ip access-list 100 55 fwd7 tcp
host 192.168.3.4
host 10.6.7.8
default action for list 100 is permit

show ip access-lists details

Use the show ip access-lists details command to view complete data of
a policy list (including DSCP and composite operation tables).
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
show ip access-lists details [<policy-list-number>]
policy-list-number
Avaya X330W-2DS1 User's Guide
The policy list number (integer from 100 to 199 where
0 is the default list).
0.0.0.255
7000 8000
eq
The policy list number (integer from 100 to 199).
Entering 0 displays the default list.
range 5000 6000
33333
Policy CLI Commands
117