Erase Startup-Config; Get Time; Hostname - Avaya X330W2-DS1 User Manual

ver num
file type
file location
file description
Note: If the N/A is displayed for the EW_Archive file, this means that the Device
Manager S/W is not loaded correctly. Download the Device Manager S/W again.

erase startup-config

The erase startup-config command erases the startup configuration
NVRAM.
The syntax for this command is:
erase startup-config

get time

Use the get time command to retrieve the time from the network.
The syntax for this command is:
get time
Output Example:
get time
Time is being acquired from server 0.0.0.0!

hostname

Use the hostname command to change the Command Line Interface (CLI)
prompt. The current device number always appears at the end of the prompt.
Avaya X330W-2DS1 User's Guide
S/W Version number – relevant only for the Device
Management S/W
There are several file types:
• Running Conf – the configuration currently in use and the
startup configuration
• SW Web Image – Device Manager S/W archive file
Type of internal memory into which the file is loaded
Description of the file
General: Device Commands
51