Ip Distribution Access-List-Name; Ip Distribution Access-List-Owner - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
destination-list
Example:
X330WAN-2DS1-1(configure)# ip distribution access-list-copy 1
3

ip distribution access-list-name

Use the ip distribution access-list-name command to set the distribution
list name.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-list-name <distribution-list-number>
<name>
distribution-list-number
name
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Example:
X330WAN-2DS1-1(configure)# ip distribution access-list-name 5
"evening"

ip distribution access-list-owner

Use the ip distribution access-list-owner command to set the policy list
owner.
Note: This command is only supported by the X330WAN module.
112
An integer (1..99)
An integer (1..99)
List name
Avaya X330W-2DS1 User's Guide