Ip Proxy-Arp (Interface Context); Ip Redirect (Interface Context) - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
The syntax for this command is:
[no] ip ospf router-id <router id>
router id
Example:
X330WAN-2DS1-1(configure)# ip ospf router-id 192.168.49.1

ip proxy-arp (Interface context)

Use the ip proxy-arp command to enable proxy ARP on an interface. The no
form of this command disables proxy ARP on an interface.
Note: This command is executed from the Fast Ethernet and Fabric Fast Ethernet
interfaces.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
X330WAN-2DS1-1(configure)# no ip proxy-arp

ip redirect (Interface context)

Use the ip redirect command to enable the sending of redirect messages on
the interface. The no form of this command disables the redirect messages. By
default, sending of redirect messages on the interface is enabled.
Note: This command is executed from the Serial, Fast Ethernet and Fabric Fast
Ethernet interfaces.
The syntax for this command is:
[no] ip redirects
Examples:
X330WAN-2DS1-1(configure)# ip redirect
X330WAN-2DS1-1(super-if:FastEthernet1)# ip redirects
76
IP address
Avaya X330W-2DS1 User's Guide