Show Controllers - Avaya X330W2-DS1 User Manual

The syntax for this command is:
remote <fdl-request-type>
fdl-request-
type
Example:
X330WAN-2DS1-1(super)# remote Reset-errored-ESF-data

show controllers

Use the show controllers command to display the status of the controller.
The syntax for this command is:
show controllers [<port>]
port
Example:
X330WAN-2DS1-1(configure)# show controllers
Output Example:
E1 1 is up.
Avaya X330W-2DS1 User's Guide
Reset Performance Monitoring Counters | Reset Errorred ESF
Data
The port number.
No alarms detected.
Framing is CRC4, Line Code is HDB3, Clock Source is
Line.
channel-group 1 timeslots 1-31
Data in current interval (778 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0
Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err
Secs, 0 Unavail Secs
Total Data (last 92 15 minute intervals):
19958 Line Code Violations, 38 Path Code Violations
0 Slip Secs, 5 Fr Loss Secs, 6 Line Err Secs, 0
Degraded Mins
WAN CLI Commands
139