Ip Composite-Op Name; Ip Composite-Op Notify - Avaya X330W2-DS1 User Manual

Chapter 7 X330WAN CLI Commands
dscp value
Example:
X330WAN-2DS1-1(configure)# ip composite-op dscp 101 17 52

ip composite-op name

Use the ip composite-op name command to set the name of a policy operation.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip composite-op name <policy-list-number> <composite-op-index>
<OpName>
policy-list-number
composite-op-index
OpName
Example:
X330WAN-2DS1-1(configure)# ip composite-op name 101 17 gold-
account

ip composite-op notify

Use the ip composite-op notify command to set the trap mode of a composite
operation in a policy list.
Note: This command is only supported by the X330WAN module.
108
DSCP entry, an integer (0-63), where 64 - no
change).
An integer (100..149), where 0 is the default
list.
Index of operation in the table.
The name you are givng the policy operation.
Avaya X330W-2DS1 User's Guide