Information On Use; Using External Products; Maintenance And Service; Disposal - BONFIGLIOLI AGILE Applications Manual

1.6

Information on Use

Warning!
The frequency inverter may be connected to power supply every 60 s. This must be
considered when operating a mains contactor in jog operation mode. For commis-
sioning or after an emergency stop, a non-recurrent, direct restart is permissible.
After a failure and restoration of the power supply, the motor may start unexpected-
ly if the auto start function is activated.
If staff is endangered, a restart of the motor must be prevented by means of exter-
nal circuitry.
Before commissioning and the start of the operation, make sure to fix all covers and
check the terminals. Check the additional monitoring and protective devices accord-
ing to EN 60204 and applicable the safety directives (e.g. Working Machines Act, Ac-
cident Prevention Directives etc.).
No connection work may be performed, while the system is in operation.
1.6.1

Using external products

Please note, that Bonfiglioli Vectron does not take any responsibility for the compatibility of
external products (e.g. motors, cables, filters, etc.).
To ensure the best system compatibility, Bonfiglioli Vectron offers components which simplify
commissioning and provide the best tuning with each other during operation.
Using the device in combination with external products is carried out at your own risk.
1.7

Maintenance and Service

Warning!
Unauthorized opening and improper interventions can lead to personal injury or
material damage. Repairs on the frequency inverters may only be carried out by the
manu-facturer or persons authorized by the manufacturer.
Check protective equipment regularly.
Any repair work must be carried out by qualified electricians.
1.8

Disposal

The dispose of frequency inverter components must be carried out in accordance with the local
and country-specific regulations and standards.
08/10
08/10
VPLC / PLC
VPLC / PLC
9
9