Other Menu Commands - BONFIGLIOLI AGILE Applications Manual

2.3.2

Other menu commands

Function
Save a VPLC file under a new file name.
Export a VPLC file to a VCB file. The VCB file con-
taining the parameter values created by the PLC
functions can be edited in VPlus.
Opens the print setup window. Prints the editor
area.
Adjust the page size of the editor.
View the page as it will be when printed.
Select all objects in editor.
Opens the VPLC setup window:
Interface:
Language:
Apply texts from
inverter:
Show parameter values: The values of fields P1
Sheet size:
The changes made with VPLC are deleted in the
frequency inverter and reset to the default set-
tings.
Apply the function block program to parameter
values and download them to the frequency inver-
ter. While edited in the editor, the function block
program is not changed in the frequency inverter.
Changes will only be applied to the frequency in-
verter by this command.
Note:
Working on the sheet doesn't change the program inside the frequency inverter. Only via the
Download Command the changes of the PLC program are loaded to the frequency inverter.
16
16
VPlus (auto) is displayed
if VPLC was started in
VPlus (default setting).
COM: The available in-
terfaces are displayed.
Only if VPLC is started
without VPlus.
Select the language of
the user environment
and the menu com-
mands.
The language selected at
the frequency inverter is
applied to the signal
sources in VPLC.
and P2 of the function
block settings will be
displayed below the
function block.
Adjust the page size of
the editor.
VPLC / PLC
VPLC / PLC
Menu command
File Save as
File Export to VCB
File Print
File Page setup
File Print preview
Edit Select all
Edit VPLC setup
PLC Delete
PLC Translate and download to fre-
quency inverter
08/10
08/10