General Safety And Application Information; General Information; Proper Use - BONFIGLIOLI ACTIVE Manual

1
This documentation has been produced with the greatest of care and extensively and
repeatedly checked. For reasons of clarity, not all the detailed information on all types
of the product and also not every imaginable case of erection, operation or mainte-
nance have been taken into account. If you require further information or if specific
problems which are not dealt with extensively enough in the documentation exist, you
can request the necessary information via the local representation of the company of
BONFIGLIOLI.
We would also point out that the contents of this documentation are not part of a
previous or existing agreement, assurance or legal relationship and are not intended
to amend the same. All obligations of the manufacturer result from the underlying
purchase contract, which also contains the complete and solely valid warranty regula-
tion. These contractual warranty provisions are neither extended nor limited by the
production of this documentation.
The manufacturer reserves the right to correct or amend the contents and the product
information as well as omissions without prior notification and assumes no kind of
liability for damage, injuries or expenditure to be put down to the aforementioned
reasons.
1.1
Warning! BONFIGLIOLI VECTRON frequency inverters have high voltage levels dur-
1.2
Warning! The frequency inverters are electrical drive components intended for in-
4
4

General safety and application information

General information

ing operating, depending on their protection class, drive moving parts and
have hot surfaces.
In the event of inadmissible removal of the necessary covers, improper
use, wrong installation or operation, there is the risk of serious damage to
persons or property.
To avoid the damage, only qualified staff may carry out the transport,
installation, setup or maintenance work required. Comply with the s EN
50178, IEC 60364 (Cenelec HD 384 or DIN VDE 0100), IEC 60664-1
(Cenelec HD 625 or VDE 0110-1), BGV A2 (VBG 4) and national provi-
sions. Qualified persons within the meaning of this principal safety infor-
mation are people acquainted with the erection, fitting, commissioning
and operating of frequency inverters and the possible hazards and in pos-
session of qualifications matching their activities.

Proper use

stallation in industrial plant or machines. Commissioning and start of in-
tended operation are not allowed until it has been established that the
machine corresponds to the provisions of the EC machine directive
98/37/EEC and EN 60204. According to the CE sign, the frequency invert-
ers additionally fulfill the requirements of the low-voltage directive
73/23/EEC and the s EN 50178 / DIN VDE 0160 and EN 61800-2. Respon-
sibility for compliance with the EMC directive 89/336/EEC is with the user.
Frequency inverters are available in a limited way and as components
exclusively intended for professional use within the meaning of the EN
61000-3-2.
With the issue of the UL according to UL508c, the requirements of the
CSA Standard C22.2-No. 14-95 have also been fulfilled.
The technical data and the information on connection and ambient condi-
tions the rating plate and the documentation be complied with. The in-
structions must have been read and understood before starting work at
the device.
06/05
06/05