General Information About The Documentation; Instruction Manuals; This Document - BONFIGLIOLI Agile Applications Manual

1 General information about the documentation

The present documentation complements the operating instructions Agile (AGL). It contains additional
safety information and requirements for the operation of Agile (AGL) in safety-oriented applications.
Use in safety-oriented machines shall be permissible only after this documentation has been read care-
fully and understood. The applicable basic standards as well as application-specific and specific national
standards shall also be complied with – the standards referred to in this manual shall also be complied
with.

1.1 Instruction manuals

For better clarity, the documentation is structured according to the customer-specific requirements
made on the frequency inverter.
Quick start guide
The Quick Start Guide describes the basic steps required for mechanical and electrical installation of the
frequency inverter. The guided commissioning supports you in the selection of necessary parameters
and the configuration of the frequency inverter by the software.
Operating instructions
The Operating Instructions describe and document all functions of the frequency inverter. The param-
eters required for adapting the frequency inverter to specific applications as well as the wide range of
additional functions are described in detail.
Application manual
The application manual supplements the documentation for purposeful installation and commissioning
of the frequency inverter. Information on various subjects connected with the use of the frequency
inverter is described specific to the application.
If you need a copy of the documentation or additional information, contact your local representative of
BONFIGLIOLI.
The present documentation was prepared with great care and it was subjected to extensive and re-
peated reviews. For reasons of clarity, it was not possible to include all details of all types of the product
in the documentation. Neither was it possible to consider all conceivable installation, operation or
maintenance situations. If you require further information or if you meet with specific problems which
are not dealt with in sufficient detail in the documentation, contact your local BONFIGLIOLI agent.
We would also like to point out that the contents of this documentation do not form part of any previous
or existing agreement, assurance or legal relationship. Neither are they intended to supplement or
replace such agreements, assurances or legal relationships. The manufacturer's obligations are exclu-
sively specified in the relevant purchase contract. This contract also contains all and any warranty reg-
ulations which may apply to the relevant scope of supply. These contractual warranty provisions are
neither extended nor limited by the specifications contained in this documentation.
The manufacturer reserves the right to correct or amend the specifications, product information and
omissions in these operating instructions without notice. The manufacturer shall not be liable for any
damage, injuries or costs which may be caused by the aforementioned reasons.
This documentation was written in German. Other language versions are translated.

1.2 This document

The present documentation complements the operating instructions AGL (Device series Agile). It con-
tains additional safety information and requirements for the operation or Agile (AGL) in safety-oriented
applications. Use in safety-oriented machines shall be permissible only after this documentation has
been read carefully and understood.
The applicable basic standards as well as application-specific and specific national standards shall also
be complied with – the standards referred to in this manual shall also be complied with.
For this reason, make sure you read the user manual carefully.
IMPORTANT:
Compliance with the documentation is required to ensure safe operation of the frequency
inverter. Bonfiglioli Vectron GmbH shall not be held liable for any damage caused by any
non-compliance with the documentation.
03/18 AGL-STOV0-01SV0-06 5