Output In Binary Code - HEIDENHAIN TNC 415 Technical Manual

3 Output in binary code

If the OEM-cycles have been fully tested and the dialogs have been specified, the two can be output
in binary form for EPROM programming, together with the PLC program and the error messages. It
is possible to output the files located in both the PLC EPROM and the NC program memory in binary
code.
An accurate description of file output via the data interface is given in the "PLC Programming"
Manual.
9-8 TNC 407/TNC 415/TNC 425 3 Output in binary code 01.98