Protocols; Example Of Software Handshake - HEIDENHAIN TNC 415 Technical Manual

Example of software handshake:

Peripheral unit
Receive buffer fulll
<DC3>
Receive butter
ready again
<DC1>
Hardware handshake (see section "Freely configurable interfaces")

3.1.2 Protocols

This section lists the transfer protocols for the various methods of data output and input.
The EXT1 mode is set:
– Control character for "End of Text": <ETX>
– Control character for "End of Transfer": <EOT>
– Software handshake
8-30 TNC 407/TNC 415/TNC 425
Transmission path
2 TNC data interfaces
TNC
.
.
.
12 Z+Z FMAX <CR> <LF>
13 Z–10 F100 M03 <CR> <LF>
.
.
.
01.98