Orientation From Rotation; Orientation From Standstill - HEIDENHAIN TNC 415 Technical Manual

A separate k -factor for each gear range can be entered in MP3440 for a more exact control of the
v
spindle orientation. A display of the spindle position is activated with MP40. The spindle position is
displayed only if neither M03 nor M04 is active. It is displayed as a value below 360 degrees.

Orientation from rotation:

S
[rpm]
Prog. rpm
RPM for
orientation
0

Orientation from standstill:

S
[rpm]
Prog. rpm
RPM for
orientation
0
01.98 TNC 407/TNC 415/TNC 425
MP3410.1
M19
MP3410.0
M05
4 Main Spindle
MP3410.1
Target
position
Distance
to target position
Stand-
still
M19 Target
position
t
MP3410.1
t
4-107