Pocket Milling - HEIDENHAIN TNC 415 Technical Manual

MP7245.1 Inhibit the HEIDENHAIN standard-Cycles 16 to 30
Entry:
Bit 0 Cycle 16
Bit 1 Cycle 17
Bit 2 Cycle 18
Bit 3 Cycle 19
Bit 4 Cycle 20
Bit 5 Cycle 21
Bit 6 Cycle 22
Bit 7 Cycle 23
Bit 8 Cycle 24
Bit 9 Cycle 25
Bit 10 Cycle 26
Bit 11 Cycle 27
Bit 12 Cycle 28
Bit 13 Cycle 29
Bit 14 Cycle 30
Bit 15 Cycle 31

6.7.2 Pocket milling

The overlap-factor for clearing out a rectangular or circular pocket (Cycle 4 and Cycle 5) can be
altered by machine parameters.
Stepover
Stepover = (MP7430) x cutter radius
MP7430 Overlap-factor for pocket milling
Entry: 0.100 to 1.414
01.98 TNC 407/TNC 415/TNC 425
0 to 65 535
$0 to $FFFF
0 = do not disable
1 = disable
6 Display and operation 4-145