Program Module Manual Tool Out - HEIDENHAIN TNC 415 Technical Manual

15.3.6 Program module MANUAL TOOL OUT

M -> N or M -> S: Normal or Special tool follows Manual tool
The operator is prompted to unload the spindle manually as there is no pocket for the current tool in
the magazine. The called tool is loaded automatically.
Move axes to
manual change
position
Prompt user to
unload tool and
press OK key
No
OK key
pressed
Yes
Load zero in
SPIREG
(spindle empty)
TOOL CALL
feedback
M2046 = 1
Yes
TOOL CALL
strobe set again
4-252 TNC 407/TNC 415/TNC 425
GRE1 = P
Yes
GRE1 = 0
Yes
STANDBY BACK
Module
Fetch tool to
No
15 Tool changer
No
No GRE1
empty
Unload GRE1
STANDBY
Module
GRE1
CHANGE
Module
End
Tool in GRE1
01.98