3.14.3 Storing a STRING (=)
Abbreviation for PLC Editor:
Execution time [µs]
Number of bytes
Operands: S <arg>
Operation:
With the = command a STRING from the STRING Accumulator is stored in a STRING memory. The
selection of the memory, into which the STRING should be copied, proceeds using the Argument
<arg> after the operand designation. Whereby only the Arguments 0 – 3, which address a STRING
memory (S0 – S3) are valid here.
Refer also to operand explanation.
3.14.4 Overwriting of a STRING (OVWR)
Abbreviation for PLC Editor:
Execution time [µs]
Number of bytes
Operands: S <arg>
Operation:
With the OVWR command a STRING from the STRING Accumulator is stored in a STRING memory.
This command functions in a similar manner to the = command, with the difference that the
character "STRING-End" is not transferred alongside. By this means, the beginning of a STRING
which is already in the STRING memory, can be overwritten.
The selection of the memory, into which the STRING should be copied, proceeds using the
Argument <arg> after the operand designation. Whereby only the Arguments 0 – 3, which address a
STRING memory (S0 – S3) are valid here.
Refer also to operand explanation.
7-116
TNC 407/TNC 415/TNC 425
=
STRING memory
Immediate STRING
STRING from error message or dialogue files
OVWR (OVERWRITE)
STRING memory
Immediate STRING
STRING from error message or dialogue files
3 Commands
< 80
10
—
—
< 80
10
—
—
01.98