Assignment - HEIDENHAIN TNC 415 Technical Manual

A secondary linear axis is designated by the letter U, V or W. The correlation with the principal
axes and the direction of travel are also standardized in ISO 841.
+Z
+Y
+W
+V
+X
+U
MP410 Axis designation
Entry:
MP410.3
MP410.4

1.2.1 Assignment

The measuring system inputs X1 to X6 and the analogue outputs, Output 1 to Output S (on the
connector X8 ) can be assigned to the individual axes. The assignment is determined by the machine
parameters MP110 and MP120.
The assignment of measuring system input X6 and the nominal value output S to one of the five
axes is only possible when the function Spindle-Orientation is not utilised.
MP110 Assignment of the measuring system inputs to the axes
Entry:
MP110.0 X axis
MP110.1 Y axis
MP110.2 Z axis
MP110.3 4th axis
MP110.4 5th axis
01.98 TNC 407/TNC 415/TNC 425
0 = A
1 = B
2 = C
3 = U
4 = V
5 = W
4th axis
5th axis
0 = measuring system input X1
1 = measuring system, encoder input X2
2 = measuring system, encoder input X3
3 = measuring system, encoder input X4
4 = measuring system, encoder input X5
5 = measuring system, encoder input X6
1 Machine axes 4-13