7Plc Programming - HEIDENHAIN TNC 415 Technical Manual

7PLC Programming — Contents
1 PLC functions
1.1 Select PLC operation
1.2 PLC – Main menu
1.3 File management
1.4 Text Editor
1.5 File output via data interface
1.6 Test functions for the PLC program
1.6.1 TRACE functions
1.6.2 Logic diagram
1.6.3 TABLE function
1.6.4 COMPILE function
2 Program creation
2.1 Program structure
2.1.1 Command
2.1.2 Module technique
2.2 Address allocation
2.2.1 Operand directory
2.2.2 Addressing the memory
2.3 Data transfer NC/PLC
2.3.1 Number transfer
2.3.2 General data transfer (Strobes)
2.4 Timers and counters
2.4.1 Timers
2.4.2 Counters
2.5 Edge evaluation of the PLC inputs
2.6 EPROM creation
2.7 Error messages
3 Commands
3.1 Load and Assign Commands
3.1.1 LOAD (L)
3.1.2 LOAD NOT (LN)
3.1.3 LOAD TWO'S-COMPLEMENT (L–)
3.1.4 LOAD BYTE (LB)
3.1.5 LOAD WORD (LW)
3.1.6 LOAD DOUBLEWORD (LD)
3.1.7 ASSIGN (=)
3.1.8 ASSIGN BYTE (B=)
3.1.9 ASSIGN WORD (W=)
3.1.10 ASSIGN DOUBLEWORD (D=)
3.1.11 ASSIGN NOT (=N)
01.98 TNC 407/TNC 415/TNC 425
Fehler! Textmarke nicht definiert.-177-6
7-6
7-7
7-8
7-10
7-10
7-11
7-11
7-11
7-12
7-12
7-16
7-16
7-16
7-17
7-18
7-18
7-18
7-19
7-19
7-23
7-24
7-24
7-26
7-27
7-28
7-30
7-36
7-36
7-36
7-38
7-40
7-41
7-41
7-41
7-43
7-45
7-45
7-45
7-46
7-1