Compute String Length; Delete Plc Window - HEIDENHAIN TNC 415 Technical Manual

Example:
Beispiel: 1
S0 X
S1 1
Error status after call: M3171 =
4.5.2 Compute String Length (Module 9071)
Computes the length of the string with the specified number in the string buffer.
Possible errors:
- The number of the source string is outside the valid range (0..3).
- The source string has been searched without an end of string (<NUL>) being found.
Call:
PS K/B/W/D <Number of source string>
CM 9071
PL B/W/D <Length of string>
Error status after call: M3171 =
4.6 PLC Window
4.6.1 Delete PLC Window (Module 9080)
Deletes the screen window for the PLC status display. The background color of the window is
defined in machine parameter MP7320.2 or MP7356.0.
Constraints:
- This job cannot be aborted by a CAN command during processing of the module in a SUBMIT Job.
The module is also active when the currently selected screen shows no PLC status window (e.g.
large graphic displays) or when the screen with PLC status window is in the background.
Possible errors:
- The module has not been called from a SUBMIT Job.
7-152 TNC 407/TNC 415/TNC 425
- P O S . :
2 3
0: Number was transferred
1: Error condition see above
0: String length was computed
1: Error conditions see above
4 PLC Modules
11
1 2 3
1 1 STACK
01.98