Colour Adjustment - HEIDENHAIN TNC 415 Technical Manual

6.2 Colour adjustment

The BC 110 is a 14 inch colour-graphics screen with a resolution of 640 x 490 pixels. The colours in
the screen-display can be selected by machine parameter. For example, the colours can be adjusted
to suit the corporate image of the machine tool builder image or the design of the machine.
The following colour adjustments cannot be altered by machine parameters:
– HEIDENHAIN company logo after switching on the machine (GREEN),
– flashing error messages (RED),
– error message for invalid machine parameter (RED),
– plan view in the graphics display (BLUE),
– cursor (always inverse).
The entry values for colour adjustment are byte-oriented. The preferred entry is hexadecimal.
Colour
HEX Ranges 0 to 3
Adjustment coarse
Entry for yellow:
$0....
Since it is possible to make mistakes when setting the colours (e.g.. red error messages on red
background), HEIDENHAIN recommends a standard colour-adjustment. This standard colour setting
is the setting generally used by HEIDENHAIN and is prompted by the control system when creating
the MP list.
The standard colour-adjustment is given in the following list.
Machine Colour for ...
parameter
MP7350 Window frame
MP7351 Error messages
MP 7352 Operating-mode display "Machine"
MP7352.0 Background
MP7352.1 Text for operating mode
MP7352.2 Dialogue
MP7353 Operating-mode display "Programming"
MP7353.0 Background
MP7353.1 Text for operating mode
MP7353.2 Dialogue
MP7354 Program-text display "Machine"
MP7354.0 Background
MP7354.1 General program-text
MP7354.2 Current block
MP7354.3 Background not active window
4-130 TNC 407/TNC 415/TNC 425
Red
0 to F
fine
3 9
6 Display and operation
Green
0 to 3 0 to F
coarse fine
3 9
Standard colour-adjustment
$030200C
$03F3F0F
$0000000
$0342008
$03F3828
$0000000
$0342008
$03F3828
$0080400
$038240C
$038341C
$00C0800
Blue
0 to 3 0 to F
coarse fine
0 0
01.98