Program Module Manual Tool In/Out - HEIDENHAIN TNC 415 Technical Manual

15.3.7 Program module MANUAL TOOL IN/OUT

M -> M: Manual tool follows Manual tool.
The operator is prompted to unload the spindle and load the new tool manually as there is no pocket
for these tools in the magazine.
Move axis to
manual change
position
Prompt user to
unload old and
load new tool
Press OK key
No
OK key
pressed
Yes
Load T code to
SPIREG
End
01.98 TNC 407/TNC 415/TNC 425 15 Tool changer 4-253