Changes In The Id-Number; Id-Numbers Assigned To Date - HEIDENHAIN TNC 415 Technical Manual

1.1 Changes in the ID-number

If development or manufacturing requirements make it necessary to alter any of the hardware
components, HEIDENHAIN will change the ID-numbers of the hardware components.

ID-Numbers assigned to date:

. VDU:
Id.-Nr. 254 740 01
Id.-Nr. 260 520 01
. PLC-I/O board:
Id.-Nr. 252 855 01
Id.-Nr. 263 371 01
Id.-Nr. 263 371 02
Id.-Nr. 263 371 12
. TNC keyboard:
Id.-Nr. 250 517 01
Id.-Nr. 250 517 03
3-6 TNC 407/TNC 415/TNC 425
BC 110 Separate power-
supply for fan
BC 110 B Power supply for
fan taken from
VDU supply
PL 400
PL 410
PL 410 B with analog inputs
(5 V interface)
PL 410 B without analog inputs
(5 V interface)
TE 400
TE 400 with APPR/DEP key
1 Hardware components
until 5/91
since 11/90
since 2/90
since 10/92
since 10/94
since 10/94
since 2/90
since 9/92
01.98