Operation Of Tool Software - Panasonic FP7 User Manual

7.1.2 Operation of Tool Software

This section describes the procedure for performing remote programming from FPWIN GR7.
PROCEDURE
1. Select "Online" > "Communication Settings" from the menu bar.
The "Communication Settings" dialog box is displayed.
2. Select a slot number (MEWNET/ET-LAN) and slot number of the home unit
in which the FP7 MW Unit is installed.
3. Select the unit number of a PLC to be remotely programmed.
4. Press the [OK] button.
The slot number and unit number of the connected communicating unit is
displayed on the right side of the status field. After that, remote programming
operation can be performed for the communicating unit, such as
uploading/downloading projects, monitoring devices, and monitoring
statuses.
7.1 Remote Programming
7-3