Start And Stop Of Logging/Trace Operation; Start And Stop With Tool Software - Panasonic FP7 User Manual

Start-Stop and Monitor

3.1 Start and Stop of Logging/Trace Operation

3.1.1 Start and Stop with Tool Software

 Overview
 The logging/trace operation can be started and stopped with the tool software.
PROCEDURE
1. Select "Tool" > "Logging/Trace Monitor" in the menu bar.
The "Logging/Trace Monitor" dialog box is displayed.
2. Check the box of a desired LOG number, and press the [Start] button.
A confirmation message is displayed.
3. Press the [Yes] button.
Starting the logging operation is requested by the operation specified in the
"Logging/Trace Settings" dialog box. System relays relating to the execution of
logging/trace can be monitored in the above dialog box. Once the operation is
started normally, the "logging/trace active" and "SD card logging/trace active"
flags turn on.
4. For stopping the logging/trace operation, check the box of a desired LOG
number and press the [Stop] button.
Stopping the logging/trace operation is requested. Once the logging/trace
operation ends normally, the "logging/trace done" flag turns on.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
3-2