Managing Server Hardware Faults Through The Oracle Ilom Fault Management Shell - Oracle X6-2 Service Manual

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
installing a power supply, ensure that it is fully seated and engaged with its connector inside the
drive bay. A properly installed PSU has a lit green AC OK indicator.
Top Cover
The server top cover is an important component for a properly functioning server. The top cover
is vital to the server cooling subsystem because it helps to maintain the pressure areas within
the server, and the top cover also protects against accidental exposure to hazardous voltages
and damage to internal components. For these reasons, the server top cover is interlocked to
the server power. The interlock is created by a switch that is mounted inside the server on the
metal bracket just behind the DIMMs. The switch engages when the cover is installed, allowing
power to be applied to the server. When the cover is not installed, the server cannot power on. If
the server is powered on when the cover is removed, power is immediately switched off.
Action: If the server does not power on, check that the switch is intact and properly
aligned. Ensure that the server top cover is in place and sits flat and snug on top of the
server. Ensure that the interlock switch components have not been damaged, removed, or
misaligned. For instructions for properly installing the top cover, see "Install the Server Top
Cover" on page 188.
Prevention: After removing the top cover, take care that it does not get bent. When servicing
the server, take care that the internally mounted interlock switch component does not get
damaged or misaligned. Never operate the server without the top cover installed.
Managing Server Hardware Faults Through the
Oracle ILOM Fault Management Shell
The Oracle ILOM Fault Management Shell enables Oracle Services personnel to view and
manage fault activity on a managed servers and other types of devices.
For more information about how to use the Oracle ILOM Fault Management Shell, see the
Oracle ILOM User's Guide for System Monitoring and Diagnostics Firmware Release 3.2.x in
the Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at:
http://www.
oracle.com/goto/ilom/docs
Caution - The purpose of the Oracle ILOM Fault Management Shell is to help Oracle
Caution -
Services personnel diagnose system problems. Customers should not launch this shell or run
fault management commands in the shell unless requested to do so by Oracle Services.
Troubleshooting and Diagnostics 37