Bootp Relay Commands - D-Link DES-3326SRM Command Line Interface Reference Manual

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
The BOOTP relay commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
config bootp_relay
config bootp_relay
add
config bootp_relay
delete
enable bootp_relay
disable bootp_relay
show bootp_relay
Each command is listed, in detail, in the following sections.

Bootp Relay Commands

B
OOTP
Parameters
hops <value>
time <sec>
ipif <ipif_name>
<ipaddr>
ipif <ipif_name>
<ipaddr>
ipif <ipif_name>
R C
ELAY
24
OMMANDS
255