Show Ip Arp Inspection Log - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show ip arp inspection log

To show the status of the log buffer, use the show ip arp inspection log command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
Examples
This example shows how to display the current contents of the log buffer before and after the buffers are
cleared:
Switch# show ip arp inspection log
Total Log Buffer Size : 10
Syslog rate : 0 entries per 10 seconds.
Interface
---------------
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Fa6/3
Switch#
This example shows how to clear the buffer with the clear ip arp inspection log command:
Switch# clear ip arp inspection log
Switch# show ip arp inspection log
Total Log Buffer Size : 10
Syslog rate : 0 entries per 10 seconds.
No entries in log buffer.
Switch#
OL-27596 -01
show ip arp inspection log
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Vlan Sender MAC
----- -----------------
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
1 0002.0002.0002
-- --
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Sender IP
---------------
1.1.1.2
1.1.1.3
1.1.1.4
1.1.1.5
1.1.1.6
1.1.1.7
1.1.1.8
1.1.1.9
1.1.1.10
1.1.1.11
-- --
show ip arp inspection log
Num of Pkts
-----------
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
1(12:02:52 UTC Fri Apr 25 2003)
5(12:02:52 UTC Fri Apr 25 2003)
2-735