Configuring Port Security; Add User Name Cli Commands; Authenticated Users Table - Dell PowerConnect 5316M User Manual

None — The user was not authenticated.
MAC Address — The supplicant MAC address.
Displaying the Authenticated Users Table
1
Open the Authenticated Users page.
2
Click Show All.
The Authenticated Users Table opens:
Figure 7-80. Authenticated Users Table
Authenticating Users Using the CLI Commands
The following table summarizes the equivalent CLI commands for authenticating users as
displayed in the Authenticated Users page.
Table 7-46. Add User Name CLI Commands
CLI Command
show dot1x users [username
username]
The following is an example of the CLI commands:
console# show dot1x users
Port
-----------------------------------------------------------------
g12

Configuring Port Security

Network security can be increased by limiting access on a specific port only to users with specific
MAC addresses. The MAC addresses can be dynamically learned, up to that point, or they can be
statically configured. Locked port security monitors both received and learned packets that are
received on specific ports. Access to the locked port is limited to users with specific MAC addresses.
These addresses are either manually defined on the port, or learned on that port up to the point
when it is locked. When a packet is received on a locked port, and the packet's source MAC address
178
Configuring Switch Module Information
Description
Displays 802.1X users for the switch module.
Username Session Time Auth Method MAC Address
gili 00:09:27 Remote 00:80:c8:b9:dc:1d