Table of Contents
Advertisement
Configuring a cross-connect
Step
1.
Enter system view.
2.
Create a cross-connect
group and enter
cross-connect group view.
3.
(Optional.) Configure a
description for the
cross-connect group.
4.
(Optional.) Enable the
cross-connect group.
5.
Create a cross-connect and
enter cross-connect view.
6.
Configure an MTU for the
PW.
Configuring a PW
Configuring a PW class
You can configure PW attributes such as the PW type and enable control word in a PW class. PWs
with the same attributes can reference the same PW class.
To configure a PW class:
Step
1.
Enter system view.
2.
Create a PW class and enter PW
class view.
3.
(Optional.) Enable control word.
4.
(Optional.) Specify the PW type.
5.
(Optional.) Enable sequencing for
both incoming and outgoing
packets on the PW.
Configuring a static PW
Step
1.
Enter system view.
2.
Enter cross-connect group
view.
Command
system-view
xconnect-group group-name
description text
undo shutdown
connection connection-name
mtu mtu
Command
system-view
pw-class class-name
control-word enable
pw-type { ethernet |
vlan }
sequencing both
Command
system-view
xconnect-group group-name
415
Remarks
N/A
By default, no cross-connect
group is created.
By default, no description is
configured for the cross-connect
group.
By default, the cross-connect
group is enabled.
By default, no cross-connect is
created.
The default MTU is 1500 bytes.
The two PEs on an LDP PW must
have the same MTU configured
for the PW. Otherwise, the PW
cannot go up.
Remarks
N/A
By default, no PW class is created.
By default, control word is disabled.
By default, the PW type is VLAN.
By default, sequencing is disabled.
Remarks
N/A
N/A
Advertisement
Table of Contents
