Thermo Scientific 48i Instruction Manual page 263

Thermo Fisher Scientific
erec
erxy
x = | 0 | 1 | : Reply termination format (see "set format format"
command)
y = | 0 | 1 | 2 | : Output format (see "set erec format format" command)
These commands return a snapshot of the main operating conditions
(measurements and status) at the time the command is issued. The
following example shows a typical response.
The format is defined within the command (in the case of erxy) or by the
current settings of the "format" and "erec format" commands (in the case
of erec). For details on erec formatting, see the
section at the end of this appendix. For details on how to decode the flag
fields within these records, see the "flags" command.
Send: erec
Receive: erec
09:48 04-06-05 flags 9C040510 CO 0.000 4 loCO -0.002
4 s/r 0.000 los/r 0.902 biasv -112.668 agci 96.500 intt
34.023 cht 47.995 smpfl 0.000 pres 0.000 avgt1 10 avgt2
10 CObkg -0.000 COcoef 1.000 loCOcoef 1.000 COrange
10000000.000 loCOrange 10000000.000 motor 100.000
lrec
srec
lrec rec num
srec rec num
lrxy rec num
srxy rec num
lrec aa:bb oo-pp-qq yy
srec aa:bb oo-pp-qq yy
rec = The starting record index number (1=most recent)
num = The number of records to return (1 to 10)
x = | 0 | 1 | : Reply termination format (see "set format format"
command)
y = | 0 | 1 | 2 | : Output format (see "set lrec/srec format format"
command)
aa = hours (01 to 23)
bb = minutes (01 to 59)
oo = month (01 to 12)
pp = day (01 to 31)
qq = year
C-Link Protocol Commands
Datalogging
"Record Layout Definition"
Model 48i Instruction Manual B-21