Select Srec/Lrec
View Logged Data
Number of Records
Thermo Fisher Scientific
DATALOGGING SETTINGS:
>SELECT SREC/LREC
VIEW LOGGED DATA
ERASE LOG
SELECT CONTENT
COMMIT CONTENT
RANGE
AVG
RESET TO DEFAULT CONTENT
CONFIGURE DATALOGGING
The Select Srec/Lrec screen is used to select the log record type for other
operations in this menu.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> Select Srec/Lrec.
SELECT LOG TYPE:
CURRENTLY:
SET TO:
RANGE
AVG
The View Logged Data screen is used to select the starting point to view
the logged data by the number of records or by date and time. Note that
both types of records cannot be viewed at the same time, only the selected
record type.
In the Main Menu, choose Instrument Controls > Datalogging Settings
●
> View Logged Data.
SELECT START POINT BY:
SET TO: # OF RECS
CHANGE
RANGE
AVG
The Number of Records screen is used to select the number of records to
view, ending with the most recent. It also shows the total number of
records that have been logged for the selected record type.
SREC
DIAGS ALARM
SREC
LREC ?
TOGGLE VALUE
DIAGS ALARM
ACCEPT
DIAGS ALARM
Model 48i Instruction Manual
Operation
Instrument Controls Menu
3-27