Thermo Scientific 48i Instruction Manual page 8

About This Manual
Safety
Safety and Equipment
Damage Alerts
ii Model 48i Instruction Manual
Appendix C
●
MODBUS Protocol Interface and is supported both over RS-232/485
(RTU protocol) as well as TCP/IP over Ethernet.
Appendix D
●
description of the Gesytec (Bayern-Hessen or BH) Protocol Interface
and is supported both over RS-232/485 as well as TCP/IP over
Ethernet.
Safety
Review the following safety information carefully before using the analyzer.
This manual provides specific information on how to operate the analyzer,
however, if the analyzer is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
This manual contains important information to alert you to potential safety
hazards and risks of equipment damage. Refer to the following types of
alerts you may see in this manual.
Safety and Equipment Damage Alert Descriptions
Alert
Safety and Equipment Damage Alerts in this Manual
Alert
"MODBUS Protocol" provides a description of the
"Gesytec (Bayern-Hessen)
Description
DANGER A hazard is present that could result in death or serious
personal injury if the warning is ignored.
WARNING A hazard or unsafe practice could result in serious
personal injury if the warning is ignored.
CAUTION A hazard or unsafe practice could result in minor to
moderate personal injury if the warning is ignored.
Equipment Damage A hazard or unsafe practice could result in property
damage if the warning is ignored.
Description
WARNING The Model 48i is supplied with a three-wire grounded
power cord. Under no circumstances should this
grounding system be defeated.
If the equipment is operated in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
The service procedures in this manual are restricted to
qualified service personnel only.
Protocol" provides a
▲
▲
▲
▲
▲
▲
Thermo Fisher Scientific
▲