Table B-6. Stream Time Values - Thermo Scientific 48i Instruction Manual

C-Link Protocol Commands
Calibration
Calibration
B-26 Model 48i Instruction Manual
stream per
This command reports the current time interval in seconds for streaming
data. The following example reports the streaming period is set to 10
seconds.
Send: stream per
Receive: stream per 10
set stream per number value
number value = | 1 | 2 | 5 | 10 | 20 | 30 | 60 | 90 |120 | 180 | 240 | 300 |
This command sets the time interval between two consecutive streaming
data strings to number value in seconds. The following example sets the
number value to 10 seconds.
Send: set stream per 10
Receive: set stream per 10 ok
stream time
This command reports if the streaming data string will have a time stamp
attached to it or not, according to
reports that the streaming data shall not include a time stamp.
Send: stream time
Receive: stream time 0
set stream time value
This command enables value, where value is to attach or disable time stamp
to streaming data string, according to
attaches a time stamp to streaming data.
Send: set stream time 0
Receive: set stream time 0 ok
Table B–6. Stream Time Values
Stream Time
Value
0 Disables time stamp to streaming data string
1 Attaches time stamp to streaming data string
set cal co bkg
set zero calibrate
These commands will set the CO background. The following example
shows a successful auto-calibration of the CO background.
Table B–6. The following example
Table B–6. The following example
Thermo Fisher Scientific