Thermo Fisher Scientific
About This Manual
This manual provides information about installing, operating, maintaining,
and servicing the Model 48i CO gas analyzer. It also contains important
alerts to ensure safe operation and prevent equipment damage. The manual
is organized into the following chapters and appendices to provide direct
access to specific operation and service information.
Chapter 1 "Introduction" provides an overview of product features,
●
describes the principles of operation, and lists the specifications.
Chapter 2 "Installation" describes how to unpack, setup, and startup
●
the analyzer.
Chapter 3 "Operation" describes the front panel display, the front
●
panel pushbuttons, and the menu-driven firmware.
Chapter 4 "Calibration" provides the procedures for calibrating the
●
analyzer and describes the required equipment.
Chapter 5
"Preventive
●
to ensure reliable and consistent instrument operation.
Chapter 6 "Troubleshooting" presents guidelines for diagnosing
●
analyzer failures, isolating faults, and includes recommended actions for
restoring proper operation.
Chapter 7 "Servicing" presents safety alerts for technicians working on
●
the analyzer, step-by-step instructions for repairing and replacing
components, and a replacement parts list. It also includes contact
information for product support and technical information.
Chapter 8
"System
●
the system components, provides an overview of the firmware structure,
and includes a description of the system electronics and input/output
connections.
Chapter 9
"Optional
●
that can be used with this analyzer.
Appendix A "Warranty" is a copy of the warranty statement.
●
Appendix B
"C-Link Protocol
●
the C-Link protocol commands that can be used to remotely control an
analyzer using a host device such as a PC or datalogger.
Maintenance" provides maintenance procedures
Description" describes the function and location of
Equipment" describes the optional equipment
Commands" provides a description of
Model 48i Instruction Manual
i