Operation
Service Menu
Concentrations
Corrected Concentrations
3-92
Model 48i Instruction Manual
SELECT RUN SCREEN ITEM:
CONCENTRATIONS
CORRECTED CONCENTRATIONS
OTHER MEASUREMENTS
ANALOG INPUTS
RANGE
AVG
The Concentrations screen is used to display a list of concentration
parameters that can be specified for the selected item number. The selected
item is shown by "<--" after it. In dual or auto range mode, "HI" or "LO"
is displayed to indicate high or low concentrations. Range Status is visible
only in auto range mode. O2 % is visible only if the O
option is enable.
In the Main Menu, choose Service > Setup Run Screen > select a Run
●
Screen > select Run Screen Item > Concentrations.
CONCENTRATIONS:
>NONE
CO
LO CO
HI CO
RANGE STATUS
RANGE
AVG
O2 %
The Corrected Concentrations screen is used to display a list of corrected
concentration parameters that can be specified for the selected item
number. The selected item is shown by "<--" after it. In dual or auto range
mode, "HI" or "LO" is displayed to indicate high or low concentrations.
Range Status is visible only in auto range mode. This screen is only
displayed if the O
compensation option is enabled.
2
In the Main Menu, choose Service > Setup Run Screen > select a Run
●
Screen > select Run Screen Item > Corrected Concentrations.
CORRECTED CONCENTRATIONS:
>NONE
CO COR
LO CO COR
HI CO COR
RANGE
AVG
DIAGS ALARM
<--
DIAGS ALARM
<--
DIAGS ALARM
compensation
2
Thermo Fisher Scientific