Table B-11. Power Up Mode Values; Table B-12. Set Layout Ack Values - Thermo Scientific 48i Instruction Manual

Thermo Fisher Scientific
Table B–11. Power Up Mode Values
Power up Mode
Value
0 Local/Unlocked Mode (default)
1 Remote/Locked Mode
program no
This command reports the analyzer's model information and program
version number.
Send: program no
Receive: program no iSeries 48i 01.02.12.095
set layout ack
This command reports the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, according to
reports that the instrument is configured to do nothing.
Send: layout ack
Receive: layout ack 0
set layout ack value
This command disables the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, according to
Send: set layout ack
Receive: set layout ack ok
Table B–12. Set Layout Ack Values
Function
Value
0 Do nothing (default)
1 Append "*"
tz
This command reports the "tz" timezone string for the NTP server. See
"Network Time Protocol Server" in the "Communications Settings"
section of the "Operation" chapter for more information.
Send: tz
Receive: tz EST+5EDT
C-Link Protocol Commands
Communications Configuration
Table B–12. The following example
Table B–12.
Model 48i Instruction Manual B-47