Thermo Scientific 48i Instruction Manual page 251

Thermo Fisher Scientific
Command Description
pres comp Reports/sets pressure compensation on or off
program no Reports analyzer program number
push Simulates pressing a key on the front panel
range Reports/sets current CO range
range mode Reports/sets current range mode
ratio Reports sample/reference ratio
relay stat Reports/sets relay logic status to for the designated relay(s)
ri (right) Simulates pressing right pushbutton
ru (run) Simulates pressing run pushbutton
sample Sets zero/span valves to sample mode
save Stores parameters in FLASH
save params Stores parameters in FLASH
sc (screen) C-series legacy command that reports a generic response (Use
iscreen instead)
sp conc Reports/sets span concentration
sp field Reports/sets item number and name in scratch pad list
span Sets zero/span valves to span mode
span cal reset Reports/sets span cal reset on/off
span calibrate Sets CO coefficient
span dev Reports/sets span deviation (maximum span check offset)
span dur Reports/sets how long span gas is sampled by the instrument
sr Reports the last srec stored
srec Reports maximum number of srecs
srec format Reports/sets output format for srecs (ASCII or binary)
srec layout Reports current layout of srec data
srec mem size Reports maximum number of srecs that can be stored
srec per Reports/sets srec logging period
stream per Reports/sets current set time interval for streaming data
stream time Reports/sets a time stamp to streaming data or not
temp comp Reports/sets temperature compensation on or off
time Reports/sets current time (24-hour time)
tz Reports/sets the timezone string for the network time protocol
server
up Simulates pressing up pushbutton
C-Link Protocol Commands
Commands
Page
B-37
B-47
B-33
B-35
B-36
B-13
B-52
B-33
B-33
B-36
B-40
B-40
B-34
B-29
B-25
B-37
B-30
B-27
B-31
B-31
B-21
B-21
B-22
B-23
B-23
B-23
B-26
B-26
B-38
B-40
B-47
B-33
Model 48i Instruction Manual B-9