Set System Date/Time/Day - Panasonic S-ics Technical Manual

Section 700 - Operation
Considerations
• N/A

Set System Date/Time/Day

Description
The System allows you to change the date, time, and day of week. When setting the time, you can
specify 12 or 24 hour format.
Operation
To change the system date, time, and day of week:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 000.
3. Press the HOLD key.
4. Enter the year (two characters), month (two characters), and
day (two characters).
Note: To clear an entry or existing data, press the FL/R
key.
5. Press the HOLD key.
6. Enter the hour (two characters) and minute (two characters).
Note: To clear an entry or existing data, press the FL/R
key.
7. Press the HOLD key.
8. Enter the day of week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun.
Note: To clear an entry or existing data, press the FL/R
key.
9. Press the HOLD key to store the entry.
10. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
S-ICX-64-700
Action
S-ICX (International) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
0 :YYMMDD
Date displays
1 :HHMM
Time displays
2 :
Day of the Week displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
107