Siemens SINUMERIK 840D sl Operating Manual page 668

Tool management
13.13 Filtering the tool management lists
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message if
conflicting filter options are selected.
You can configure OR logic operations for the various filter criteria.
References
A description of the configuration options is provided in
SINUMERIK Operate Commissioning Manual
Procedure
...
668
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
3. Press the ">>" and "Filter" softkeys.
The "Filter" window opens.
4. Activate the required filter criterion and press the "OK" softkey.
The tools that correspond to the selection criteria are displayed in the list.
The active filter is displayed in the window header.
Operating Manual, 05/2017, A5E40868956
Milling