Multi-channel view
11.4 Setting the multi-channel view
Procedure
622
1.
Select the "Machine" operating area.
2.
Select the "JOG", "MDA" or "AUTO" mode.
3.
Press the menu forward key and the "Settings" softkey.
4.
Press the "Multi-channel view" softkey.
The "Settings for Multi-Channel View" window is opened.
5.
Set the multi-channel or single-channel view and define which channels
are to be seen in the "Machine" operating area - and in the editor - in
which sequence.
Operating Manual, 05/2017, A5E40868956
Milling