Editing Block Properties Subsequently; Editing The Program Block With The "Ladder Editor; Editing The Plc User Program - Siemens SINUMERIK 840D sl Operating Manual

Edit PLC user program (828D only)
24.5 View of the program blocks
24.5.7.6

Editing block properties subsequently

You can edit the title, author and comments of a block.
Note
You cannot edit the block name, subprogram number and data class assignment.
Procedure
24.5.8

Editing the program block with the "Ladder editor"

24.5.8.1

Editing the PLC user program

You can change and extend the PLC user program with the ladder editor.
All the operations supported by the PLC type are available for the editing. Subprograms and
interrupt programs can be added and deleted.
Note
Saving changes
If you make changes in the program, you must save the project before you change from the
PLC area to another operating area. You can transfer the project to the PLC using the "Load
to CPU" softkey. If this is not done, all of the changes will be lost and must be re-entered.
Please note the corresponding program information:
834
1. The relevant block is selected and the "Program Block" window is open.
3. Press the "Properties" softkey.
The "Properties" window appears.
Software option
You require the "SINUMERIK 828 ladder logic editor" option to edit PLC user
programs.
Operating Manual, 05/2017, A5E40868956
Milling