Siemens SINUMERIK 840D sl Operating Manual page 229
Milling
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
References
Programming Manual Measuring Cycles / 840D sl/828D
Note
You have the option of changing the feedrate velocity in operation.
See also
Current block display (Page 44)
Milling
Operating Manual, 05/2017, A5E40868956
3.
Press the menu forward key and the "Settings" softkey.
The "Settings for Automatic Operation" window opens.
4.
In "DRY run feedrate," enter the desired dry run speed.
5.
Enter the desired percentage in the "Reduced rapid traverse RG0" field.
RG0 has no effect if you do not change the specified amount of 100%.
6.
Select the required entry in the "Display measurement result" field:
●
"Automatic"
The measurement result window opens automatically.
● "manual"
The measurement result window is to be opened by pressing the
"Measurement result" softkey.
7.
Select the required entry in the "Record machining times" and in the
"Save machining times" field.
Machining the workpiece
6.17 Setting for automatic mode
229
Advertisement
Table of Contents
