Siemens SINUMERIK 840D sl Operating Manual page 783

Softkeys on the machine control panel menu
Available softkeys:
"Machine" softkey
"[VAR]" softkey
"1... n CHANNEL"
softkey
"Single Block" soft‐
key
"WCS MCS" softkey Switch between WCS and MCS
"Back" softkey
Milling
Operating Manual, 05/2017, A5E40868956
You can expand the user softkey bar to display eight additional softkeys via the
menu forward key.
You use the "Back" softkey to hide the menu bar again.
Select the "Machine" operating area
Select the axis feedrate in the variable increment
Change the channel
Switch single block execution on/off
Close the window.
18.3 Machine control panel menu
HT 8
783