Siemens SINUMERIK 840D sl Operating Manual page 480

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Parameter
ZR
(for ShopMill program)
Align tool through beta and gamma angles
β
(for ShopMill program)
γ
(for ShopMill program)
Directly position rotary axes
B1
(for ShopMill program)
C1
(for ShopMill program)
αC
(for ShopMill program)
Hirth joint
Tool
480
Description
Retraction path - only for incremental retraction in
Align tool with swivel axes
● Input value
The required angle can be freely entered
● β = 0°
● β = 90°
● 0°
● 180°
● The required angle can be freely entered
Directly align the tool with the swiveling axes:
The required angle can be freely entered
The required angle can be freely entered
Rotational position for a pole position
● Round to the next Hirth joint
● Round up to Hirth joint
● Round down to Hirth joint
Note:
For machines with a Hirth joint
Tool tip when swiveling
● Tracking
The position of the tool tip is maintained during swiveling.
● No tracking
The position of the tool tip is not maintained during swiveling.
Unit
mm
Degrees
Degrees
Degrees
Degrees
Degrees
Operating Manual, 05/2017, A5E40868956
Milling