Siemens SINUMERIK 840D sl Operating Manual page 510

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Parameters in the "Input complete" mode
G code program parameters
Input
PL Machining plane
Parameter
TC
Retraction
(for ShopMill program)
ZR
(for ShopMill program)
Align tool through beta and gamma angles
β
(for ShopMill program)
510
● complete
Description
Name of the swivel data set
Note: The selection box only appears if more than one swivel data set has been set
up.
● No
The axis is not retracted before swiveling
● Z
Retraction in the direction of machine axis Z
● Z,X,Y
Move machining axes to retraction position before swiveling
● Tool direction, max.
Maximum retraction (up to the software end position) in the tool direction
● Tool direction, inc.
Incremental retraction (specified retraction distance, up to the software end
position) in the tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
Retraction path - only for incremental retraction in
Align tool with swivel axes
● Input value
The required angle can be freely entered
● β = 0°
● β = 90°
ShopMill program parameters (thread chain)
T Tool name
D Cutting edge number
S / V Spindle speed or
Constant cutting rate
Operating Manual, 05/2017, A5E40868956
rpm
m/min
Unit
mm
Degrees
Milling