Operating with gestures
3.3 Finger gestures
Note
Flicking gestures with several fingers
The gestures only function reliably if you hold the fingers sufficiently far apart. Fingers should
be at least 1 cm apart.
66
Pan with one finger
● Move graphic contents (e.g. simulation, mold making view)
● Move list contents
Pan with two fingers
● Turn graphic contents (e.g. simulation, mold making view)
Tapping and holding
● Open object for changing (e.g. NC block)
Tapping with 2 index fingers - only with the 840D sl
● Tap with two fingers simultaneously in the lower right and
left-hand corners to open the TCU menu.
The menu has to be opened for service purposes.
Operating Manual, 05/2017, A5E40868956
Milling